Some more code and functions.
Now we have Auto Stor for infra-red codes by typing Autostoron at the terminal the AVR will respond "Auto Stor On" now when we press a button on the remote its code will be displayed on the LCD , printed to the terminal and we hear a double beep from the speaker telling us that the code has been stored in EEprom starting at the first location Code(1) it is now ready for code 2 we can keep pressing buttons and storing codes till we get to 40 at which it will stop storing we can also type Autostoroff at the terminal at any time to turn the function off the AVR will respond "Auto Stor Off" Now it is easy to use any remote. I have included the eeprom codes for the DX remote as DXremote-codes.bin this was copied from the eeprom and saved it starts at the number button 1 goes to 0 which is location 10 then the on/off button is 11 going left to right we get to 19 the + button skip 0 then 20 and U/SD button is 21. So by loading this file into eeprom you can use the DX.com remote.
Regards Paul
↧