Hello
I just set up a PCB with a XMega384C3. I soldered everything and now wanted to start programming .... presuming Bascom would support all current XMegas. What a pitfall.
No 384 support, neither any of the C-Series is supported right now.
(Yes, I know I should have checked before .... but I didn't :oops: .... and I need 384K of flash and want to use DMA later, which only leaves me with the Xmega384C3)
[b:94ecd234a1]Is there any help? [/b:94ecd234a1]
ATXMega256A3 looks similar but I am not experiences with all the different XMega-types. Can/shall I rename one of the existing def-files (even if it would support only 128 or 256K of flash right now)? Or the ATXMega128D3?
If there is a alpha/beta def file for this controller I am glad to test it and even to improve it.
Thanks for your help!!
Peter
[b:94ecd234a1][color=red:94ecd234a1](BASCOM-AVR version : 2.0.7.6 )[/b:94ecd234a1][/color:94ecd234a1]
↧