my experience shows no effect definig different pins in
Config Rc5 = Pinb.1 , Timer = 1 , Mode = Background 'config RC5 receiver port
Config Portb.1 = Input
Portb.1 = 1
I allways have to connect the IR-receiver output at pinb.0 regardless of the config statement :shock:
Toggle a LED connected to portb.5 (the same port but different pin as for the IR-receiver connection) dosen't work either.
What's wrong in my code, my hardware setup?
Verry confused
-MHz
[b:eccdd80ad1][color=red:eccdd80ad1](BASCOM-AVR version : 2.0.7.7 )[/b:eccdd80ad1][/color:eccdd80ad1]
↧