I have the i2c/twi slave lib and was hoping I could use it with the tiny85 but it has no real twi, only usi 2-wire mode :-(
And int0 is the same pin as the T0 pin :-(
If anyone have any suggestions, I'd be very happy, since I've been stupid and made the PCB's without testing this first... :-(
The Tiny85 is on a bus with several other i2c slave devices and a meg128 as master
[b:edbf7fa535][color=red:edbf7fa535](BASCOM-AVR version : 2.0.7.6 )[/b:edbf7fa535][/color:edbf7fa535]
↧