More than fifty views and no single answer? Is it something wrong with my formulation of the question?
Btw, the problem is still there, I can print out numbers, but only by specifying it like:
[code:1:17a8869814]
Dim dat As Byte
dat=1 ' dat=0..9 is working
Call Lcd_print(dat , I , 0 , 0)
or
Call Lcd_print(dat , I , 1 , 0)
Call Wait_for_busy
Lcd_cs = 1
[/code:1:17a8869814]
where dat is byte in range 0-9.
I've checked the signals on the scope and everything is like in the datasheet, the timings are good and rise/fall is at the expected locations.
Thanks again.
↧