Hi All,
On the MCS website somewhere, I found this link to a site called the O-Family (Japanese site)
On that site is a logic analyzer which uses a Mega88. All software is on the site, source code included.
I thought that this would be a good test for the GLCD Screen grab that Six1 and myself have been working on.
However, when I tries to compile the BAS file, all these .DEF errors come up.
I looked in the "m88def.dat" and found that Movw =1 so it should recognize that this is a legal command for the 88.
I looked in the data sheet and it does indeed have this command.
I've had a look on the forum, but nobody seems to have ad this problem and also, the original author of this project MUST have compiled it,
as there is also a Hex file provided.
Attached is the BAS file from that site downloaded today.
Anybody have any Ideas.
Regards
Deanus
[b:04bf4d5e6e][color=red:04bf4d5e6e](BASCOM-AVR version : 2.0.7.7 , Latest : 2.0.7.6 )[/b:04bf4d5e6e][/color:04bf4d5e6e]
↧