I'm working with an USB AVR ISP Programmer which is installed in BASCOM 2.0.7.6 as an SDK500 native driver (using Windows 7/64).
After starting the program, the chip is detected properly in the lower status window (e.g. Chip ID: 1E930B = ATTINY85).
However whenever I try to refresh the upper tabs containing the chip window by pressing the Refresh button in the "Lock and Fuse Bits" tab, those tabs will not be updated. Especially the "Lock and Fuse Bits" tab isn't even redrawn. After switching to either the Flash or EEPROM tabs and switching back it still contains the unchanged datagrid from the previous window.
The same error appears in BASCOM 2.0.7.6 using either Windows XP, Win7/32, or Win7/64.
In BASCOM 2.0.7.2 this procedure works fine.
I'd appreciate someone helping me fix my problem.
Thanks in advance
Ernst
[b:167f8ee319][color=red:167f8ee319](BASCOM-AVR version : 2.0.7.6 )[/b:167f8ee319][/color:167f8ee319]
↧