[quote:563089b05d="albertsm"]thanks for testing. i found the problem.
it depends on the chip or actually the spsr address. for the m2561 SBIS can not be used and is converted into 2 instructions.
but the *.equ was not registered leading to wrong code. so it was actually a problem of the internal assembler.[/quote:563089b05d]
Hi, Mark and Everyone!
Compiler version :2.0.7.7
Compiler build :2.0.7.7.001
IDE version :2.0.7.7.001
MMCSD_HC.LIB Libversion = [b:563089b05d]3.04 test release !?[/b:563089b05d]
Statement = No Source Code From The Library May Be Distributed In Any Form Unless You Have Permision From The Author
Statement = For support please check http://members.aon.at/voegel for contact address
History = No Known Bugs.
history=3.03 saved r23, xmega supported
history=3.04 removed card deselect for arduino shields that drive a buffer with CS
history=3.05 when you define a CONST named SHIELD you can use the W5200 arduino topboard.this shield has the buffer connected to CS.
Again, the exact same error!
HC-card work without problems, 1.x-card detects once in ten - an error &HE9 - Mmcsd_try=3
↧