it seems our post crossed. you can still try the samples. i see no reason for the fact that the first conversion would be wrong,
you can also reduce the code so it still demonstrates the problem.
your code should however still include the settings :
$hwstack=40
$swstack=16
$framesize=32
that is what i used and works in the sim. only too little $framesize could explain your problem but the settings you gave are ok.
when however the variable is a long (more bits) the $framesize must be increased.
please upload a zip that contains the bas, rpt, bin , hex and cfg files.
if it is a software problem, it is simple reproducible and i should get the same error.
i also wondered if you tried the simulator and what the results were?
↧
