Tried it and it works....
With a not programmed Atxmega128A1. Remove all four jumpers of the Alvidi module (RS232). The MAX3232 on the module will be isolated. Connect the TXD1 and RXD1 from the WIZFI210 to the second RS232 of the Alvidi module. Connect a terminal program, 115200 baud and power the board. If all is connected right you will get the information from the WIZFI210. Start the WizSmartScript and there you go.
[img:4dcc800265]http://members.home.nl/hobbycorner/images/7inch_display/rs232_trick.jpg[/img:4dcc800265]
Have fun
Ben Zijlstra
Theo Kleijn
↧