I would greatly appreciate your help.
I have spent many days trying to see something on the screen and finally thanks to your forum and I have seen life on display.
and unfortunately the Proton Compiler forums there is nothing on the SSD1306.
Ebay Store: [url]http://www.ebay.co.uk/itm/0-96-128x64-OLED-Display-Module-SSD1306-Arudino-AVR-/130536921656[/url]
Here, I explain my configuration on the protoboard and Pins have Oled Display.
(Because there a lot of models about it).
Pins Oled Display Board:
--------------------------
3V3 --- D0 (SCLK)
RS --- D1 (SDIN)
CS --- D2
WR --- D3
RD --- D4
RES --- D5
VIN --- D6
GND ---D7
'-----------------------------------
'Connection ProtoBoard:
------------------------------------
D1/LCD (SDIN) => PIC/B0 (SDA) Pull Resistor to VCC
D0/LCD (SCLK) => PIC/B1 (SCL) Pull Resistor to VCC
RES=> PIC/E0
CS=> PIC/E1
3V3 => 3V3 (VCC)
VBAT/LCD => +
BS0/LCD => 0
BS1/LCD => 1
BS2/LCD => 0
VIN (VCOMH)=> Capacitor 4,7uF Not Pol. to GND
RS(SAO)= GND
WR=> GND
RD=> GND
THX...
↧