Hi Board;
This is about the following directive;
Config GRAPHLCD = type , DATAPORT = port, CONTROLPORT=port , CE = pin , CD = pin , WR = pin, RD=pin, RESET= pin, FS=pin, MODE = mode
I have a board which is prewired to 128x64 GLCD as follows;
DB0~DB3 to PA4 to PA7
DB4 to PG5
DB5 ~DB7 to PC7 to PC5
rest of the commands to differnet pins.
Could anyone help me override the setting that "Config" statement above mandates for. Can we assign data and control ports to unique pins....
-Sandy
[b:c74d8626e4][color=red:c74d8626e4](BASCOM-AVR version : 1.11.9.5 , Latest : 2.0.7.6 )[/b:c74d8626e4][/color:c74d8626e4]
↧