Once again I ran into problems with Buffered serial in. This time on a Mega32.
I have a device connected that starts its messages with STX (=$02), then a bunch of ordinary ASCII characters (32 through 127) and terminates with ETX (=$03)
Setting up Config Serialin with Bytematch = 3 should work.
It doesn't :(
Can Buffered serial in handle STX and ETX ?
Nard
[b:cd30baa0e3][color=red:cd30baa0e3](BASCOM-AVR version : 2.0.7.6 )[/b:cd30baa0e3][/color:cd30baa0e3]
↧