Hi Mark,
I have tested with the Bascom full setup (2.0.7.6) and after setup
and reboot I get this error in the Windows system log:
(Which is the same error as last year).
=======================================
Windows 7 64-bit Ultimate (English)
Event ID:7000, Service control Manager
The TVicPort service failed to start due to the following error:
The system cannot find the file specified.
=======================================
After running setup.exe as admin (Bascom 2.0.7.6 full) and
selecting "Parallel Port Support driver" the file TVicPort64.sys
is "visible" here:
(File size 16080 bytes, file version: 5.2.1.0).
C:WindowsSystem32driversTVicPort64.sys
C:WindowsSysWOW64driversTVicPort64.sys
=======================================
In the Windows Registry the setup program has written the
key TVicPort in 3 locations (see below) but the name of
the file TVicPort64.sys (& path) is missing from the Windows
registry. If the path and the file name is missing, it is normal
that you get the above error from the Service control Manager.
HKEY_LOCAL_MACHINESYSTEMControlSet001servicesTVicPort
HKEY_LOCAL_MACHINESYSTEMControlSet002servicesTVicPort
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTVicPort
These are the subkeys present in the above 3 keys:
Value 0
Name: Type
Type: REG_DWORD
Data: 0x1
Value 1
Name: Start
Type: REG_DWORD
Data: 0x2
Value 2
Name: ErrorControl
Type: REG_DWORD
Data: 0x1
Value 3
Name: Group
Type: REG_SZ
Data: Extended Base
Value 4
Name: Parameters
Type: REG_SZ
Data:
=======================================
Best regards,
Luciano
↧