Keep in mind that [u:abf5fa6784]every[/u:abf5fa6784] packet send over the rs485 is handled by ALL the tiles. If the tile is doing something with the data will depend on the address.
This makes me curious about your protocol.
To get the data to the correct tile you need something like an address in your protocol, however if you send the data binary it could be possible that a part of the data stream looks exactly the same as the part with the address and therefore will trigger the wrong tile to do something with some garbage data.
Btw, very nice board on the picture. Looks fun the work on. :D
↧